KiwiSpace / Antipodes
Description Amount Notes Check? Memo
Human Resources:
Suit tester 1 set hook
Sampler 1 taking sample, storing set hook
Monitor 1 observing, writing protocol, does NEVER touch the suit, equipment, sample set hook
Bestboy 1 filming, assistance set hook
Material:
Spacesuit gloves 1 set hook
Protection overall 2 set hook
Protection gloves 1 box set hook
Microspherules set hook
Transportbox for samples/microscope slides 1 set hook
Transportbox for samples/sampling bags 1 set hook
Pipette (1ml) 1 set hook
Pipette tips 1 box set hook
Alcoholpads set hook
Inoculation loop set hook
microscope slides 50 set hook
Adhesive tape Scotch Crystal 6-1925R1 set hook
Q-tips 1 box set hook
Hammer 1 set hook
sterile sampling bags set hook
Camera 1 set hook
Waterproof marker 1 set hook
Clipboard 1 set hook
First experiment:
Preparation:
ST = Suittester, S = Sampler, M = Monitor, BB = Bestboy
Who? Procs
S, BB Put on protection overall
S, BB Put on protection gloves
Experiment:
ALL Go to experiment spot 1 set hook
S, ST Clean suit-testers gloves with alcoholpads set hook
S, BB Mark a 3 x 1 cm sized spot on ST gloves set hook
S, BB Take sample from marked area set hook
S, BB Label and stowe sample set hook
S, BB Contaminate marked spot with 1 ml microspherules set hook
S, BB Take inoculation loop to dispense the whole spot set hook
ALL Wait for it to dry set hook
S, BB clean Hammer with alcohol wipes set hook
S, BB Take sample from Hammers handle(position where ST will take/hold the hammer) set hook
set hook
S, BB Label and stowe sample set hook
S, ST Give hammer to ST set hook
ST Use hammer to take rock sample set hook
S, BB Open sterile sample bag set hook
ST Chip stone sample into sterile sample bag set hook
S, BB Seal sterile sample bag set hook
S, BB Label sterile sample bag with number, location, timestamp set hook
S, BB Take sample from hammers handle(position where ST took/held the hammer) Use adhesive tape and put it over sampling spot, use Q-tip to put pressure on the tape, put "hot" tape onto microscope slide. ALWAYS use new Q-tip per sample! set hook
S, BB Label microscope slide set hook
S, BB Stowe labeled microscope slide set hook
S, BB Take sample from marked spot at ST gloves set hook
S, BB Label microscope slide set hook
S, BB Stowe labeled microscope slide set hook
S, BB Clean ST gloves with alcoholpads set hook
S, BB Clean Hammer with alcoholpads set hook
Repeat first to last step three time. Use different sampling spot every time you finished a stage/passage. There should be 3 Stone-samples(each from a different spot), 3 samples from ST gloves, 3 samples from hammers handle, 3 check-plots from ST gloves and 3 check-plots from hammers handle = 15 samples
Second experiment:
Preparation:
ST = Suittester, S = Sampler, M = Monitor, BB = Bestboy
Who? Procs
S, BB Put on protection overall
S, BB Put on protection gloves
Experiment:
ALL Go to experiment spot 4 set hook
S, ST Clean suit-testers gloves with alcoholpads set hook
S, BB Take sample from gloves thumb set hook
S, BB Label and stowe sample set hook
S, BB Contaminate gloves thumb with 0.5 ml microspherules set hook
S, BB Take inoculation loop to dispense the whole spot set hook
ALL Wait for it to dry set hook
ST Take rock from ground (use "contaminated" thumb) set hook
S, BB Open sterile sample bag set hook
ST Drop stone sample into sterile sample bag set hook
S, BB Seal sterile sample bag set hook
S, BB Label sterile sample bag with number, location, timestamp set hook
S, BB Clean ST gloves with alcoholpads set hook
Repeat first to last step of second experiment two times. At the end there should be 2 Rock-samples and 2 check-plots from gloves thumb = 4 samples